How to Make a DIY Furniture Dolly

There’s no question that a furniture dolly is a valuable tool when moving your home, this simple device reduces the amount of work you have to do, making it easier for fewer people to move multiple large pieces of furniture in a short amount of time.

If you plan to move house in the near future, but have never heard of a dolly for furniture before, then they are basically a square or rectangular piece of hardwood covered with a soft material to prevent scratching. At the bottom of the dash are 4 caster wheels, each positioned at different corners to provide equal weight balance.

Buying a dolly for furniture is as easy as going to your local Home Depot store; there you will find many brands of different shapes and sizes. The average price range varies depending on the material it is made from and the additional special features included, although the standard types will be made of wood and will cost less than $ 100 each.

If you plan to move home yourself, you may need more than one dolly for furniture to speed up the process. Instead of spending a couple hundred bucks on 2-3 dollies that you’ll probably never use again, why not make your own? If you take a quick look around your garage, you probably have all the supplies you need to make a dolly or two for furniture. The basic materials for a single furniture dolly are an 18 “by 32” flat plywood board, a length of 2 x 4 boards, unused carpet scraps, 4 roller coaster caster wheels, several screws, and a bit. strong glue.

If you wanted to buy all the items needed to make a dolly for furniture, it would cost you less than $ 100 at any home store. Now that you have all the necessary materials, you can start making your own dolly; If your flat plywood board is not yet 18 “by 32”, you will need to cut it with a hand saw or electric circular saw.

The next step is to take the 2 x 4 board and cut it into 4 separate pieces, 2 of these will be 32 “long and the other 2 will be 10” long. These 4 pieces of board will need to be bolted to one side of the plywood board along each side in a rectangular frame shape, attach the two 32 “pieces first and then the 10” pieces at each end.

Now that you have the main frame and deck finished, glue a piece of carpet material along the flat side of the board so that it covers the entire surface. Once it has dried, you can take the 4 caster wheels from the coaster and screw them into each corner, bringing them at least 2.5 “from the edge, so the dolly can be tilted to fit under the cabinet you need to move. To add more maneuverability and making it possible to pull the furniture dolly, drill two 1/2-inch holes on each side of what will be the front of the dolly and thread a piece of string tying it into the medium; this will act as a handle.